Pedalboard

  • Temple Pedal Plate with Adhesive, Large

    With Temple’s Quick Release Pedal Mounting System you can now change out your pedals on the fly. No more messy Velcro or screwing pedals to your board. Simply adhere the plate to the back of your pedal and position the pedal anywhere on the board, screw to fasten from the back.

     

    Size: 3.12in x 3.12in (79mm x 79mm)
    Included: 1x Temple Thumb Screw

     

     

    Model: TQR-L

     

    Options:

    RM19.90
  • Temple Replacement Adhesive
    for Small Pedal Plates

    These replacement adhesive pads allow you to remove and reuse your existing Temple Audio Quick Release Pedal Plates.

     

     

    Model: TQR-SA

     

    Options:

    RM9.50
  • Temple Replacement Adhesive
    for Medium Pedal Plates

    These replacement adhesive pads allow you to remove and reuse your existing Temple Audio Quick Release Pedal Plates.

     

     

    Model: TQR-MA

     

    Options:

    RM12.30
  • Temple Replacement Adhesive
    for Large Pedal Plates

    These replacement adhesive pads allow you to remove and reuse your existing Temple Audio Quick Release Pedal Plates.

     

     

    Model: TQR-LA

     

    Options:

    RM14.20
  • Temple Mounting Bracket for SOLO Series

    This optional mounting bracket mounts anywhere on the secondary rail system of the underside of your Templeboard. It helps further tension and stiffen the top surface and can also be used to mount smaller items on the bracket with a Small or Medium Pedal Plate.

     

    Included: 4x Mounting Screws with Rubber Feet

     

    Note: The DUO 24, DUO 34 and TRIO 28 come standard with one Mounting Bracket pre-installed. The TRIO 43 comes standard with two.

     

     

    Model: TQR-SOLO

     

    Options:

    RM71.00
  • Temple Mounting Bracket for DUO Series

    This optional mounting bracket mounts anywhere on the secondary rail system of the underside of your Templeboard. It helps further tension and stiffen the top surface and can also be used to mount smaller items on the bracket with a Small or Medium Pedal Plate.

     

    Included: 4x Mounting Screws with Rubber Feet

     

    Note: The DUO 24, DUO 34 and TRIO 28 come standard with one Mounting Bracket pre-installed. The TRIO 43 comes standard with two.

     

     

    Model: TQR-DUO

     

    Options:

    RM82.50
  • Temple Mounting Bracket for TRIO Series

    This optional mounting bracket mounts anywhere on the secondary rail system of the underside of your Templeboard. It helps further tension and stiffen the top surface and can also be used to mount smaller items on the bracket with a Small or Medium Pedal Plate.

     

    Included: 4x Mounting Screws with Rubber Feet

     

    Note: The DUO 24, DUO 34 and TRIO 28 come standard with one Mounting Bracket pre-installed. The TRIO 43 comes standard with two.

     

     

    Model: TQR-TRIO

     

    Options:

    RM93.50
  • Temple IEC AC Mains Micro Module

    This IEC AC Mains connector features an integrated on/off switch as well as a metal-shielded power line noise filter. Use to power up your under mounted power supply unit and filter noise from the AC power line. Mounts in any Micro Module slot. Rated at 10amps and custom over-moulded to prevent liquid ingress.

     

    Included: 2x mounting screws and a MODDRIVER (long-shaft screwdriver)

     

     

    Model: MOD-IEC

    RM269.00
  • Temple 4-Way Jack Patch Module

    The perfect solution for routing your standard connectivity. Use with mono (TS), stereo (TRS), balanced inputs/outputs, FX Loops, amp switchers or anything else that uses a 1/4″ patch cable. Mounts in the left or right Mini Module (rectangle) slot of your Templeboard.

     

    Included: 2x mounting screws

     

     

    Model: MOD-4JPM

    RM217.00
  • Temple Stereo Sum Module

    The SUM MOD is a stereo output module that uses two independent buffers (powered by Matthews Effects) to bring life back to long chains of cables/pedals. It can also be configured to split a mono signal to two mono outputs or sum your stereo signal to a single mono out i.e. for when you only have one amp/DI (requires use of a TRS stereo jack to 2 x TS mono jack cable).

     

    The SUM MOD mounts in a mini module slot of your Templeboard’s Modular Endpanel and saves you real-estate for more pedals on top.

     

     

    Model: MOD-SUM

    RM490.00
  • Temple Dual Buffer Module

    A utility module for your 1/4″ inputs and outputs that does a lot… but in a nutshell;  allows you to buffer and split your signal in a variety of ways. It mounts in a mini module slot of your Templeboard’s Modular Endpanel and saves you real-estate for more pedals on the top of your board.

     

    The two isolated buffers (powered by Matthews Effects) bring frequencies back into your signal that can be lost by long chains of pedals/cables, vintage pickups, etc. The direction of flow on each channel is configurable as either an input or output and bypassable for situations where you may only want one channel buffered.

     

     

    Model: MOD-BUFR

    RM490.00
  • Temple Mini Module Punched Plate

    Allows you to mount standard D-punch connectors into the Mini Module (rectangle) slot on the modular endpanels of your Templeboard.

     

     

    Model: MOD-MIPP

    RM57.00
  • Temple IEC to IEC 2 Way Splitter

    Use this cable in conjunction with the Temple IEC AC Mains Micro Module to power up two power supplies under your Templeboard with easy access to one power on the side.

     

    Total Length: 100cm (40″)
    Splitter Lengths: 50cm (20″)
    Cable Rating: 6 amps

     

     

    Model: IEC-IEC2

    RM100.00
  • Temple IEC to NEMA 5-15 Adaptor

    Use this adapter in conjunction with the Temple IEC AC Mains Micro Module to convert the IEC cable end to a standard female North American 3-prong cable end (NEMA 5-15).

     

     

    Model: IEC-N515

    RM99.50
  • Temple XLR Male Connector

    Mounts to the side of your Templeboard using either a Temple Mini Module Punched Plate or Micro Module Punched Plate.

     

    Please note that the back end of the connector is bare leads and will require a cable to be soldered to it and properly insulated.

     

     

    Model: CON-XLRM

    RM35.90
  • Temple XLR Female Connector

    Mounts to the side of your Templeboard using either a Temple Mini Module Punched Plate or Micro Module Punched Plate.

     

    Please note that the back end of the connector is bare leads and will require a cable to be soldered to it and properly insulated.

     

     

    Model: CON-XLRF

    RM36.80